020 3761 3002

Murumuru Gentle Emulsion Scrub

Floviva Murumuru Scrub is a natural and sustainable alternative to the use of exfoliating synthetic polymers. The product has natural colouration without the addition of synthetic additives and offers a gentle but effective exfoliation.

Trade Name INCI Name Function %W/W
Water Aqua Solvent 55
Cetpro Thix Carbomer FD (ProTec Ingredia Ltd) Carbomer Viscosity Modifier 0.5
Cosphaderm® Propanediol natural            
(Cosphatec GmbH Via ProTec Ingredia Ltd)
Propanediol Humectant 4
Cutina GMS-SE (BASF Corporation) Glyceryl Stearate SE Emulsifier 4
Lanette 18 (BASF Corporation) Stearyl Alcohol Co-emulsifier 5
PolyAquol™ 2W (Innovacos Via ProTec Ingredia Ltd) Polyglyceryl-2- Stearate (and) Glyceryl Stearate (and) Stearyl Alcohol O\W Emulsifier 4
Cosphagard® Cap (Cosphatec GmbH Via ProTec Ingredia Ltd) Phenoxyethanol, Caprylyl Glycol Preservative 1
Cetpro APG 1200 MB (ProTec Ingredia Ltd) Lauryl Glucoside, Aqua Surfactant 20
floviva Murumuru Scrub (ProTec Botanica Ltd) Astrocaryum Murumuru Seed Powder Exfoliating Scrub 5
Pagoda Tree Herbasol Extract Glycerine SB (400597.116.2)                    
(Lipoid Kosmetik Via ProTec Ingredia Ltd)
Sophora Japonica Flower Extract, Aqua, Glycerin, Sodium Benzoate, Citric Acid, Potassium Sorbate Herbal Extract 1

Method of Manufacture

Into the main vessel add:

Water: Start the mixer on a fast speed

Carbomer: Mix until lump free and homogenous

Use the homogeniser at speed 500 for 30 seconds if any lumps persist.

Into the main vessel add:

Cosphaderm® Propanediol natural: Mix until homogeneous

Start heating the main vessel to 75C – 80C.

Into the premix vessel add:

Glyceryl Stearate SE

Stearyl Alcohol

PolyAquol™ 2W: Commence heating the premix vessel to 75-80C.

When both vessels are at 75C – 80C add the premix vessel into the main vessel.

Mix and homogenise for 10 minutes.

After 5 minutes, into the main vessel add:

Cosphagard Cap

After 10 minutes commence cooling to 35C. 

Stop Homogenising and continue with slow stirring only. 

Into the main vessel add:

Cetpro APG 1200MB: Mix until homogeneous

The product will thicken as the APG 1200 neutralises the Carbomer

As the bulk cools & thickens, adjust the mixer speed accordingly to ensure adequate turnover but avoiding aeration.

When the bulk is at 45C into the main vessel add:

floviva Murumuru Scrub: Mix until homogeneous

Pagoda Tree Herbasol Extract: Mix until homogeneous

Cool the bulk to 23C and check the product specifications.

Product Specification
pH 6.00 – 7.00
Viscosity 20,000-30,000 cps RVT TBAR D Speed 5.0, 1 minute (after 24 hours)
Colour White with brown particles
Appearance Thick, mobile emulsion